Back to Blog

Selective Licensing: What New Build Landlords Need to Check

Selective Licensing: What New Build Landlords Need to Check

If you've bought a buy-to-let new build, it's tempting to assume a brand new, NHBC-warrantied flat with a modern EPC rating sits outside the reach of local authority landlord licensing. It doesn't. Selective licensing schemes are designated by geography, not by the age or condition of the property, so a two-year-old apartment in a regenerated town centre can need exactly the same landlord licence as a converted Victorian terrace two streets away.

This matters because the question "do new builds need a landlord licence?" has a different answer depending on your postcode, not your purchase date. Councils draw licensing boundaries around streets, wards or entire boroughs based on evidence of poor housing conditions, anti-social behaviour, high deprivation, or low housing demand — criteria that are about the area, not the individual building. A new development built inside one of those boundaries is captured along with every other rental property nearby.

As of 2026, well over 100 local authorities in England operate some form of selective or additional licensing scheme, and the number of designated areas has grown steadily each year. Always check the current figure for your specific council, as designations are added and renewed regularly.

For investors who bought off-plan or are considering a new build purchase-to-let, this is a compliance step that's easy to overlook because none of the usual new build paperwork — the NHBC certificate, the EPC, the management company pack — will tell you whether a licence is required. You have to check separately, with the local authority, before you let the property.

This guide explains how selective licensing actually works, how it differs from additional and HMO licensing, exactly how to check whether a specific new build address falls inside a designated area, what an application involves, and the penalties you face if you let without a licence that was required. It cross-references related compliance issues covered in our guides on EPC rules for new build buy-to-let investors and insurance and protection for new build investment properties.

What Selective Licensing Actually Is

Selective licensing is a power given to local housing authorities in England and Wales under Part 3 of the Housing Act 2004 (with equivalent but distinct frameworks in Scotland and Northern Ireland, covered later). It allows a council to designate a defined area — a few streets, a ward, or in some cases the whole local authority boundary — where every privately rented property, regardless of size, type, age or tenant number, must hold a landlord licence to be let legally.

Unlike HMO licensing, which targets shared housing based on occupant numbers, selective licensing is purely geographic. A council doesn't need to find anything wrong with your specific new build; it only needs to have evidence that the designated area as a whole suffers from one or more of a set list of problems.

The legal grounds a council must show

  • Low housing demand in the area, or the area is at risk of becoming low demand.
  • Significant and persistent anti-social behaviour that some or all private landlords are failing to take action to combat.
  • Poor property conditions across a significant proportion of the private rented stock in the area.
  • High levels of deprivation, migration, or crime linked to the private rented sector (used by some councils for area-wide or "large-scale" designations that now require Secretary of State confirmation if they cover more than 20% of the authority's area or housing stock).

Crucially, once a designation is made, it applies to every privately rented home inside the boundary. There is no carve-out for new, well-managed, professionally let, or purpose-built rental stock. A new build apartment block let out flat-by-flat to individual buy-to-let owners is treated the same as any other rented property in that street.

The trigger for needing a licence is the postcode and tenure (private rent) of the property, never its build date, construction standard or warranty status.

Designations typically run for up to five years before a council must review and either renew, amend or withdraw them. Many areas that were designated five or ten years ago have since been renewed and, in several cases, expanded to cover more streets — which is one reason an address that wasn't licensable when a development was marketed off-plan can become licensable by the time you complete and start letting.

Selective Licensing vs Additional Licensing vs HMO Licensing

These three schemes are often confused, but they operate on different triggers and it's common for a single new build development to fall under more than one depending on how individual units are let.

SchemeWhat triggers itTypical property affectedLegal basis
Mandatory HMO licensingProperty let to 5+ unrelated occupants forming 2+ households, sharing facilitiesLarge shared houses, some co-living new build schemesHousing Act 2004, Part 2
Additional licensingCouncil-designated area, applies to smaller HMOs (3–4 occupants) within that boundaryShared flats and houses let as HMOs below the mandatory thresholdHousing Act 2004, Part 2
Selective licensingCouncil-designated area, applies to ALL privately rented homes regardless of occupant typeSingle-let new build flats, houses, apartments — the scheme most buy-to-let new build owners encounterHousing Act 2004, Part 3

For most new build investors letting a single flat to one household or one set of sharers under a standard assured shorthold tenancy, selective licensing is the one that applies if the area is designated. HMO and additional licensing only become relevant if you let to multiple unrelated sharers.

Why this distinction trips investors up

New build off-plan marketing rarely mentions licensing at all, because developers sell units to individual investors who each make their own letting decisions after completion. It is the investor's responsibility, not the developer's or the management company's, to check and apply. Some larger build-to-rent schemes handle licensing centrally because a single landlord entity owns the whole block, but if you've bought an individual unit within a mixed-tenure development, that central arrangement won't cover you.

A council can and does prosecute landlords who assumed a licence "must have been sorted by someone else" on a new development. Ignorance of a scheme's existence is not a defence once a designation has been properly publicised, which councils are required to do.

If you're weighing up a shared-living or co-living style new build investment, it's worth reading our guide on build to rent investments and new build opportunities alongside this one, since licensing responsibility shifts depending on the ownership and management structure.

Why a New Build Is Not Automatically Exempt

There is a persistent myth among first-time landlords that a property built to current Building Regulations, sold with an NHBC, LABC or Premier Guarantee warranty, and carrying a good EPC rating must somehow be outside the scope of licensing schemes designed to tackle "poor quality" rented housing. This confuses two entirely separate regulatory systems.

  • Building Regulations and warranties are about construction standards at the point of build — structural safety, insulation, fire compliance in the fabric of the building.
  • Selective licensing is about the behaviour and management of the private rented sector in a given area — things like antisocial behaviour, absentee landlords, poor repair response, and unlicensed subletting, which a council has evidenced across that locality as a whole.

A new build can be let by a landlord with no local presence, slow repairs, or poor tenant vetting just as easily as an older property can. The licence conditions exist to give the council a way of checking who owns and manages a rental property, holding them to basic standards, and having a register to act against rogue operators — irrespective of how new the bricks are.

Age and quality of construction are irrelevant to licensing law. Location of the property and its tenure (privately rented) are everything.

Regeneration areas are a particular trap

Many new build developments are specifically built as part of regeneration schemes in areas that previously had low housing demand, high deprivation, or antisocial behaviour — precisely the conditions that lead councils to introduce selective licensing in the first place. It is entirely possible, and increasingly common, for a council to designate a regeneration zone for licensing purposes at the same time as, or shortly after, new build homes are completed within it, because the licensing scheme is aimed at raising standards across the whole private rented sector in that zone, new stock included. If you're considering a regeneration-led investment, read this alongside our guide to regeneration areas as new build investment opportunities, and build a licensing check into your due diligence from day one rather than assuming the area's improvement plans mean it's licence-free.

Leasehold flats are not exempt either

Leasehold tenure, a resident management company, or a block factor/managing agent handling communal repairs does not remove the individual flat owner's obligation to licence their own let unit if the area is designated. The block's management arrangements and the flat's licensing status are two separate things.

How to Check If a Specific New Build Address Is in a Selective Licensing Scheme Areas

Checking is free and should take under half an hour per property, but it needs to be done on the exact address, not just the town or postcode district, because scheme boundaries are often drawn street by street.

  1. Identify the correct local authority. New build developments sometimes sit right on a boundary between two councils, or are built on land that was recently transferred between authorities as part of a boundary change — confirm which council actually covers the address, not which one the development is marketed under.
  2. Search "[council name] selective licensing" on the council's own website. Most councils publish an interactive map or a downloadable list of streets and postcodes covered, usually on the housing or private renting section of their site.
  3. Use the council's postcode or address lookup tool where one exists. A growing number of authorities now offer a simple online checker where you enter the exact address and it confirms whether a licence is needed.
  4. Call or email the council's private sector housing or licensing team directly if there's no map, or if your address sits near a boundary edge. Ask them to confirm in writing (an email reply is sufficient) whether the specific address requires a selective licence, an additional licence, or neither. Keep that confirmation on file.
  5. Check for upcoming designations, not just current ones. Councils are required to consult publicly before introducing or renewing a scheme, typically for a period of weeks. If a consultation is underway for your area, a licence may become mandatory shortly — worth knowing before you commit to a purchase or a tenancy start date.
  6. Re-check before every renewal of your own purchase or letting plans, not just once. Designations are typically reviewed and sometimes expanded roughly every five years, so an unlicensed area at the point of purchase can become licensable later in your ownership.
Some councils now run licensing checks as part of a wider "landlord portal" that also covers gas safety, EPC and electrical certificate reminders — worth registering for even if your current check comes back clear, since it will flag you automatically if the area is designated later.

If you're still deciding between developments, it's worth running this check before you exchange, not after completion. It takes minutes and can materially change your return calculations if licence fees and conditions apply. Our site visit checklist before reserving a new build plot is a useful companion for buyers who want a full pre-purchase due diligence routine, with licensing added as an extra line item for anyone buying to let.

Applying for a Landlord Licence: Cost, Timeline and Conditions

If your new build address falls inside a designated area, you must apply for and hold a valid licence before you let the property (or before you renew an existing tenancy, in some councils' interpretation) — not merely have an application "in progress". Processing times vary a great deal between councils, so build this into your letting timeline.

StageTypical timescaleWhat's involved
Application submission1 day (online form)Landlord and property details, management arrangements, declarations of fitness
Fit and proper person checkA few days to several weeksChecks against relevant convictions, banning orders, and the rogue landlord database
Council review and site considerationsTypically weeks, sometimes longer in high-volume boroughsConfirmation the address falls within scheme, review of any supporting evidence requested
Licence issuedValid for up to 5 years (council sets the term)Comes with standard conditions plus any property- or area-specific conditions

Fees are set locally and vary significantly — as of 2026 they commonly range from roughly £500 to over £1,200 per property for a five-year licence, though some councils charge less for a single property compared with portfolio landlords, and some offer early-bird discounts during a scheme's initial sign-up window. Always check the current fee on the specific council's published fee schedule, as it is reviewed periodically and differs widely by authority.

Standard licence conditions typically include

  • Keeping the property free of category 1 hazards under the Housing Health and Safety Rating System.
  • Providing tenants with a written tenancy agreement and the landlord's contact details.
  • Installing and maintaining smoke and carbon monoxide alarms.
  • Carrying out annual gas safety checks (where applicable) and keeping records.
  • Dealing promptly with anti-social behaviour complaints involving the tenant.
  • Providing the council with up-to-date contact and management details, including any change of managing agent.

None of these conditions are onerous for a well-run new build let — a good managing agent will already be meeting most of them — but the licence itself is the paper trail that proves it, and the council can inspect to confirm compliance at any point during the licence term.

Applying early matters: most councils will not backdate a licence to cover a period before the application was made, so a pending application does not retrospectively legalise a let that started unlicensed.

Penalties for Letting an Unlicensed Rental Property

The penalties for letting a property that required a licence you didn't hold are genuinely severe, and they have got tougher rather than more lenient in recent years. Councils have strong financial incentives to enforce, because civil penalty income is typically retained to fund further enforcement activity.

Enforcement routeWhat it means for youScale as of 2026 (check current figures)
Civil penalty noticeCouncil-issued fine as an alternative to prosecution, does not require a court appearanceUp to £30,000 per offence, set by the council; repeat or serious breaches attract higher sums
Criminal prosecutionCourt case for operating an unlicensed house, can result in an unlimited fineUnlimited fine at the discretion of the court, plus a criminal record
Rent Repayment Order (RRO)Tenant or council can apply to the First-tier Tribunal to reclaim rent paid during the unlicensed periodUp to 12 months' rent, even if the property was otherwise well managed
Banning order / database entryFor serious or repeat offences, can bar you from letting property for a set periodMinimum one year, plus entry on the national database of rogue landlords and property agents
Restriction on Section 21 noticesCannot serve a valid "no fault" eviction notice while the property remains unlicensedApplies for the duration of the non-compliance

A Rent Repayment Order is often the sharpest surprise for new build investors, because it can be sought directly by the tenant, not just the council, and the tribunal can order repayment of rent received during the entire period the property was let without the required licence — up to a maximum of twelve months. For a typical new build flat let at a market rent, that can easily run into five figures, on top of any civil penalty the council separately imposes.

You can hold more than one unlicensed property offence at once if you own several units in the same designated area. Civil penalties and RRO exposure are usually calculated per property, not capped per landlord.

It's also worth knowing that letting agents and managing agents are not automatically liable for an unlicensed property under Part 3 — the legal duty sits with the person who manages or controls the property, which in most individual buy-to-let new build cases is the owner, even where a letting agent handles day-to-day management. Check your management agreement to see exactly who has agreed to make the licence application, and confirm it in writing rather than assuming.

A Worked Example: Off-Plan Purchase in a Designated Area

Consider an investor who reserved a one-bedroom flat off-plan in a regeneration-led development two years before completion. At reservation, the council had no selective licensing scheme in the ward. By the time the block completed and the investor was ready to let, the council had run a consultation, designated the whole ward for selective licensing on the grounds of rising anti-social behaviour reports, and the scheme had been live for several months.

Because the investor's letting agent assumed "it's a new building, it won't need anything extra," no licence check was carried out before the first tenant moved in. Six months into the tenancy, the tenant raised a dispute over a deposit deduction and, in researching their rights, discovered the property was unlicensed. They applied to the First-tier Tribunal for a Rent Repayment Order.

  • The tribunal found the area had been properly designated and the council had publicised the scheme adequately.
  • The investor had no defence of "reasonable excuse" because the designation had been in force for months before the tenancy even started.
  • The tribunal ordered repayment of rent for the unlicensed period, plus the investor then had to apply for (and pay for) the licence retrospectively, alongside the risk of a separate council civil penalty.
The purchase itself was sound, the property was well built and well managed day-to-day — the failure was purely a compliance gap between exchange and the first tenancy start date, caused by not re-checking licensing status immediately before letting.

This scenario is increasingly common precisely because off-plan buying involves a long gap between reservation and the point at which you actually need to let the finished property. A licensing position that was accurate when you reserved can be entirely out of date by completion. The fix is simple: treat the licensing check as something you do in the weeks immediately before marketing the property for let, not something you did once at purchase and filed away.

How This Overlaps With Other Compliance Duties

A landlord licence is one layer of a wider compliance stack that new build investors need to keep current, and councils increasingly cross-check licensing applications against other registers rather than treating them in isolation.

Gas and electrical safety

Licence conditions almost always require an in-date gas safety record (for properties with gas appliances) and evidence of electrical safety compliance, typically an Electrical Installation Condition Report renewed on a five-year cycle. New builds are sometimes assumed to be exempt from EICR requirements because the wiring is new — they are not; the five-year check clock starts from the original installation certificate and still needs renewing on schedule.

EPC rating

Licence applications usually ask for the current EPC reference number. New builds typically score well, but proposed tightening of minimum EPC standards for rented property means this is a moving target worth monitoring — see our dedicated guide on EPC rules for new build buy-to-let investors for the detail.

Right to Rent checks

Separate from licensing, you (or your agent) must still carry out Home Office right to rent checks on tenants before any tenancy starts, regardless of whether the property needs a landlord licence.

Deposit protection

Licensing conditions sometimes explicitly require evidence that any deposit taken has been protected in a government-approved scheme within the statutory timeframe — a requirement that applies to every assured shorthold tenancy regardless of licensing, but which a council will check as part of an inspection.

Leasehold and service charge obligations

None of the above licence conditions replace your separate obligations as a leaseholder — ground rent, service charge payments, and any lease restrictions on subletting still apply independently. If you're also weighing lease length and extension costs on a new build flat, our guide to lease extension costs for new build flats covers that side of ownership.

Treat selective licensing as one item on a compliance checklist rather than a standalone task — most investors who get caught out have simply never built a recurring compliance review into their annual landlord routine.

Where Selective Licensing Is Expanding in 2026

Selective licensing coverage has grown consistently over the past decade, and several structural trends point toward further expansion rather than contraction, which matters directly for new build investors assessing an area's long-term letting costs.

  • Large-scale designations now require national sign-off. Since reforms requiring Secretary of State confirmation for schemes covering more than 20% of a local authority's area or private rented stock, some councils have instead rolled out several smaller, overlapping designations covering most of their borough piecemeal — which can be harder for investors to spot than a single borough-wide scheme.
  • Renewal cycles are adding streets, not removing them. When five-year schemes come up for renewal, councils typically present evidence of continuing need and, in many cases, extend boundaries to adjoining streets where problems have spread, rather than letting the scheme lapse.
  • Regeneration and town centre new build zones remain popular designation targets, precisely because these are often former low-demand or high-deprivation areas where new build delivery is part of a wider renewal strategy — the same areas many new build investors are drawn to for yield and growth potential, as covered in our guide to new build investment yields across Northern vs Southern England.
  • Devolved nations run separate, often broader, frameworks. Wales operates Rent Smart Wales, requiring landlord registration and, in most cases, licensing across the whole of Wales regardless of local designation — a materially different and more universal system than England's area-based approach. Scotland requires all private landlords to register with their local authority nationwide, again without the area-designation model. Northern Ireland operates its own mandatory landlord registration scheme covering the whole region.
NationLicensing modelArea-based or universal?
EnglandSelective / additional / HMO licensing under Housing Act 2004Area-based, council-designated
WalesRent Smart Wales registration and licensingUniversal across Wales
ScotlandLandlord registrationUniversal across Scotland
Northern IrelandLandlord registration schemeUniversal across Northern Ireland

If you're investing outside England, the practical message is simpler but no less firm: you need to register as a landlord regardless of whether your property is new build, so the "is my specific street designated" question that dominates the English system doesn't apply in quite the same way — but the underlying principle, that new build status grants no exemption, holds everywhere in the UK.

Practical Checklist Before You Buy or Let a New Build Investment

Build licensing into your standard due diligence routine rather than treating it as a one-off question. The following checklist works whether you're assessing a resale new build or a brand new off-plan reservation.

Before you exchange contracts

  • Identify the correct local housing authority for the exact address (not just the marketing name of the development).
  • Check the council's published selective and additional licensing maps or lists for the specific street.
  • Check whether a consultation on a new or expanded scheme is currently open or recently closed for that area.
  • Factor any applicable licence fee into your yield and cash flow calculations — it is a genuine, recurring cost of ownership in a designated area.

Between exchange and completion (especially for off-plan purchases)

  • Re-check the licensing status close to completion, since months or years may have passed since you first checked at reservation.
  • Ask your solicitor to include a licensing check as part of pre-completion searches where the conveyancer's standard search pack allows it.

Before you market the property to let

  • Confirm, in writing from the council, whether a licence is required for the specific address.
  • If required, submit the application and keep evidence of the submission date and any correspondence.
  • Do not accept tenants or sign a tenancy agreement before the licence is granted, unless you have specific written confirmation from the council of an acceptable interim arrangement.
  • Ensure your managing agent, if you use one, has explicit written responsibility (or explicitly does not have responsibility) for making and renewing the application.

Ongoing, throughout your ownership

  • Diarise the licence renewal date well ahead of expiry — late renewal after expiry is treated the same as never having applied.
  • Re-check licensing status whenever you take on a new tenancy, not just at the start of your ownership.
  • Keep gas, electrical, EPC and deposit protection evidence up to date and ready to produce, since these typically form part of licence conditions and inspections.
A five-minute check against the council's published list, repeated at each key milestone, is the entire defence against the most expensive compliance mistake a new build landlord can make.

Frequently Asked Questions

Do new builds need a landlord licence?

Yes, if the property sits inside a council-designated selective, additional or HMO licensing area. New build status, construction quality, warranty cover and EPC rating have no bearing on whether a licence is required — only the location of the property and how it is let determine that.

How do I check if my new build is in a selective licensing scheme area?

Search the relevant local authority's website for its selective licensing map or list, use any online postcode/address checker the council provides, or contact its private sector housing team directly and ask for written confirmation for the exact address.

What is the penalty for letting an unlicensed rental property?

Councils can issue a civil penalty of up to £30,000 per offence, or prosecute in court for an unlimited fine. Tenants or the council can also apply to the First-tier Tribunal for a Rent Repayment Order covering up to twelve months' rent, and you may be unable to serve a valid Section 21 notice while unlicensed. Always check the current maximum penalty figures with the relevant council, as they are reviewed periodically.

Does a new build apartment block's management company handle licensing for me?

Not usually. A resident management company or managing agent typically handles communal repairs and service charges for the building as a whole, but the obligation to licence an individual let flat sits with that flat's owner, unless you've specifically agreed otherwise in writing with a letting or management agent.

Can a licence requirement appear after I've already bought and let the property?

Yes. Councils introduce new designations and renew or expand existing ones on an ongoing basis, often with several weeks' public consultation beforehand. An area that was unlicensed when you bought or first let the property can become licensable later in your ownership, so periodic re-checking is essential.

Is selective licensing the same across the whole UK?

No. England uses area-based selective and additional licensing designated by individual councils. Wales operates Rent Smart Wales, a largely universal registration and licensing system. Scotland and Northern Ireland both require universal landlord registration rather than area-based designation. Check the specific framework for the nation your property is in.

Will my mortgage lender or landlord insurer ask about licensing?

Many buy-to-let lenders and landlord insurance policies now include questions about licensing compliance, and an unlicensed property can affect a claim or breach mortgage terms if the lender considers it an unlawful letting. Check your specific policy wording and mortgage conditions rather than assuming licensing is purely a council matter.

How much does a selective licence cost?

Fees are set locally and commonly range from roughly £500 to over £1,200 for a licence valid up to five years, as of 2026, though this varies significantly between councils and some offer discounts for early applications or portfolio landlords. Check the specific council's current published fee schedule before budgeting.

Next Steps

Licensing compliance is a background cost worth factoring in before you commit to a new build investment, not an afterthought once you've already started letting. A few practical ways to continue your research on this site:

  • Browse live schemes on /developments and check the local authority for any development you're considering before you reserve, so you can factor licensing into your yield calculations from the outset.
  • Compare individual properties by location on /map, which can help you cross-reference addresses against council-published licensing boundaries street by street.
  • Research builder track records on /builders, particularly for regeneration-led schemes where selective licensing designations are more common.
  • Search available investment-ready units on /properties and shortlist by area before carrying out your licensing check.
  • Use our calculators and guides on /tools to model how licence fees, renewal cycles and compliance costs affect your net yield.
  • Run a side-by-side /compare of shortlisted developments, including a line for licensing status and fees, alongside the usual price, yield and service charge comparisons.

For related compliance and investment planning reading, see our guides on leasehold reform and new build buy-to-let investors, exit strategies for new build investment properties, and furnished vs unfurnished letting for your new build investment, all of which touch on the wider compliance and management decisions that sit alongside licensing.

A licence is cheap and straightforward to obtain when applied for correctly and on time. The cost only becomes serious when a council or tenant discovers a letting that should have been licensed and wasn't — so make the check a routine, not a one-off.

Property Assistant

Ask me anything